[0.5.6beta] Automatic Ore Processing Unit for Luck Level 150+

Preface

The pre-technology of this device breaks through the enchantment level cap. You can refer to my other tutorial.

Materials needed to build this device: 5*World Accelerator; 5*Router; 45*Speed Upgrade; 30*Stack Upgrade; 15*Silencer Upgrade; 16*Void Module; 17*Sender Module Mk2; 1*Extractor Module Mk2; 1*Placer Module; 1*Destruction Module made with a High-Tier Fortune Pickaxe; 2*16A Battery Box; 32*Battery Box Corresponding Level Battery; 8*4A Wireless Energy Cover; 8*Wire capable of withstanding 32A current; 1*ME Wireless Terminal; 1*Large Interface; 1*Backpack with three Stack Upgrade 4s

World Accelerators use screwdrivers to switch to block entity mode, consuming 6A at the corresponding voltage level. 5 World Accelerators actually consume 30A. The higher the World Accelerator level, the faster the processing. UV level is approximately 1000 raw ore/s

Pickaxes are made into modules according to the actual Fortune level, which means they can benefit from the bonuses of Shadow Gems and Earth Gems. The bonus of 16 Earth Gems reaches Fortune level 64. Combined with a Fortune enchantment book of level 127 created with a Plant Enchanting Table, it can reach Fortune level 191, achieving an almost 100x multiplier effect.

Build

First, put down the wireless connector, large interface, and backpack. Input the ores you need to process into the backpack according to your own preferences. It is recommended to use the tag storage bus to put all raw ores into this for processing in the early stage. When cosmic essence needs raw ores in the later stage, use the tag blacklist to keep some raw ores on the main network. In the late late stage, after obtaining the star core drill, use the whitelist here to process only space mining-specific ores.

Note: forge:ores/netherite_scrap Ancient Debris has the forge:ores tag but drops itself when mined, which can crash the machine. It needs to be blacklisted.

Send module bind to me interface, extract module bind to backpack

The four corner routers above have the same configuration, as shown in the figure below. No changes are required for the phantom upgrade.

The middle router is more complex, in order: extraction module, placement module (downwards), excavation module (downwards), sending module (whitelist tagged label filtering card).

Find any coarse one in the tag filtering card and place it there, then select raw_materials in the tags, close the page, and add it to the whitelist of the sending module.

Add two more layers and place them according to the picture. Attach 4 pieces of 4A wireless energy coverage boards to each of the two 16A battery boxes. The provided 32A energy can cover 30A of expenses.

Then the machine will work normally, just input the raw ore into the backpack.